Specifications of ASC-0750, ASC-1250 & ASC-2000

• Output of 0.333 Volt at rated current
• Accuracy: ± 1% from 10% to 130% of Full Scale Range
• Phase angle < 2 º maximum at 50% rated current[For ASC-1250 & ASC-2000, phase angle <1 º maximum at 50% rated current]
• Snap closing/opening feature.
• Shrouded core blades for protection
  during installation.
• Core interleaved at joints for accuracy.
• No exposed metal parts on assembled
  transformer.
• Internal precision burden resistor across
  secondary.
• Epoxy encapsulated housing.
• Leads-8ft. twisted pair, 22 AWG, terminated with ferrules.
• Accuracy is measured from 10% to 130%
  of rated current.
• Phase angle is measured at 50% of rated
  current
• Dielectric at 2500V ac for 1 minute (As per IEEE C 57.13)

• Applications:
  Split-core current transformers has been designed to meet the growing demand for installation into existing networks. The Split-core allows installation without disconnecting cables or busbar circuits. The products are ideal for retro-fitting and are therefore popular in the Energy Management Systems, Ammeters, Watt-hour meters, Instrumentation, Relays, Panel meters, Varmeters, Power Factor Meters, Switch boards, Panel boards, Control boards and Power Factor correction industries, etc
  
  
• Opening style CTs with internal built-in burden resistor provides safety, 333mV AC output proportional to current. All current probes come pre-wired to a terminal block that plugs into the 333 mV module (VAC-17-3) which must be used with the Ammeters, Watt- hour meters, Varmeters, power factor meters, relays unit for current measurements. Accuracy for all split-core current probes: ± 1% from 10% to 130% of full rated current.
  
  
• The CTs could have burden resistors or Zener across the secondary, as per customer's demands.
  
  
• CTs, ASC-0750XXX, ASC-1250XXX, ASC-2000XXX are available.
  
  
• CTs also available in 1 A secondary current for primary current of 70 A and above.